Itaste MVP 2.0 – Mod

This mod for Innokin has a large Li-Ion battery of 2600 mAh ensuring long operation. It can be used to vary the voltage between 3.3 and 5.0 volts to adapt the voltage to whichever clearomizer/tank is used for this.

Variable Watts is used to increase or decrease the power. This allows the amount of steam to be adjusted as needed. The wattage can be adjusted between 6.0 and 11 watts.

With the pass-through mode function, it can be used even if the battery is discharged by connecting the charging cable and Vapa mode during charging.

The display shows the current Volt, Watt, Number of puffs taken since the last load and the current opposition in your coils.

With mode, adaptar is included so that it can be used with both ego and the 510 thread.
Added: This makes it suitable to run with most tanks and clearomizers on the market today.

The battery level is displayed via the battery indicator located in the key:

• Fully charged: Button lights up green light
• Average Charge: The cap shows a yellow light
• Power Low: The button shows a red light (It is now time to charge the device)

MVP 2.0 has standard safety solutions such as short-circuit protection, etc.
Charging cable included in the package.

Specifications:

• Physical dimensions: 173 mm x 41 mm x 22 mm
• Battery capacity (mAh) 2600 mAh Li-Ion
• Unit voltage: 3.3 to 5.0 VDC
• Device power: 6.0 watts – 11 W
• Unit Weight: 200g
• Manual English manual