Search

Login

Fast delivery

Over 500 vapes and e-cigs

Reviews 4.6 / 5.0

Vaporesso Target 80 Kit (5 ml, 3000 mAh) - Mod

Vaporesso Target 80 Kit (5 ml, 3000 mAh) – Mod

The Vaporesso Target 80 Kit is a combination of the Vaporesso Target 80 Mod and the Vaporesso GTX Podtank 26. The mod has a built-in 3000 mAh battery, is recharged via USB C and has a design that focuses on longer durability. The tank holds 5 ml of e-juice and is filled via the top (unscrew the mouthpiece). The tank has an adjustable airflow so you can adjust based on your own preferences. The tank is compatible with all Vaporesso GTX Coils (V2 variants/triple silicone only). Should you need to replace the pod/container that sits on the tank, the Vaporesso GTX Pod 26 fits.

595,90kr

Out of stock

Description

Among other things, the AXON Chip in the mod allows for VW Mode, which is a standard mode that allows you to freely adjust the wattage you want to use from 5-80 W (see below for the included coils’ recommended wattage). There is also Pulse Mode and F(t) Mode that optimizes vaporization and allows for higher flavor reproduction and denser vapor.

Instructions for the Vaporesso Target 80 kit

For more information about modes and safety protection, see the accompanying manual.

Installation of tank

Install the tank by screwing it into the battery’s 510 thread. Check that the tank is seated correctly.

Replacement of coil

Place the tank on a flat surface with the nozzle of the pod facing down and pull out the used coil. Install the new coil into the pod and then press the coil to adjust until the bottom of the coil sits snugly in the pod.

Refill of e-juice

Unscrew the top cover from the pod and fill with e-juice in the filling hole. Screw back the top cover as shown. Wait 5 minutes until the cotton in the coil has completely absorbed the coil.

Adjustment of air flow

Rotate the pod to adjust the airflow.

Turn the device on/off

Press the firing button 5 times within 2 seconds to start or turn off the device.

Adjustment of output power

The TARGET 80 kit uses the Vaporesso GTX coil platform and the recommended output must be taken into account before steaming.

Recommended wattage:

  • GTX 0.2 Ω MESH: 45 – 60 W
  • GTX 0.3 Ω MESH: 32 – 45 W

Start steaming

Check that everything is installed and that you have selected the recommended Watt. Then hold down the fire button while you inhale.

Charging the battery

After connecting a USB C cable to the device, a charging indicator appears on the screen with the estimated time until the battery is fully charged.

Lock or unlock the device

Press the fire button 3 times to lock “+”, “-” and the mode button. You can unlock the buttons in the same way.

Select a mode

Hold down the mode button to select from general modes (Pulse Mode / F(t) Mode / VWN Mode). Press the mode button 3 times to access the other settings.

This is included in the Vaporesso Target 80 kit

  • 1 Vaporesso TARGET 80 MOD
  • 1 x Vaporesso GTX PODTANK 26 (5 ml / 2 ml TPD)
  • 1 pcs Vaporesso GTX 0,2 Ω MESH Coil (In the package)
  • 1 pcs Vaporesso GTX 0,3 Ω MESH Coil (In the package)
  • 1 USB C cable
  • 1 user guide
  • 1 warranty card

Related products